Lowest Cost, Highest Flexibility WiFi Client or Access Point
Nano WiReach™ is a secure embedded Wireless LAN bridge that easily connects embedded devices to 802.11b/g Wireless LANs. It includes the iChip™ CO2144 IP Communication Controller™ chip and Marvell 88W8686 WiFi chipset. It is packaged in 33x17mm RoHS-compliant ultra-slim low profile form factor.
Nano WiReach makes adding WiFi connectivity to embedded devices a breeze. It does not require any kind of WiFi driver development on the host CPU, and its multiple interface (UART, SPI, RMII and USB) minimize the need to redesign the host device hardware.
Nano WiReach supports several modes of operation:
Embedded Access Point – devices containing WiFi can connect to the embedded access point to control or manage processes
LAN to WiFi Bridge – allowing transparent bridging of LAN over WiFi, using direct RMII connection to existing MAC hardware. This allows any microcontroller with a built-in Ethernet MAC to be connected to WiFi, with zero development effort
Serial to WiFi Bridge – allowing transparent bridging of Serial over WiFi, using the module’s 3Mbps fast UART
PPP emulation – allowing existing (e.g. cellular modem) designs currently using PPP to interface to the cellular modem to connect transparently over WiFi with no changes to application or drivers
Full Internet Controller mode – allowing simple MCU to use the Nano WiReach’s rich protocol and application capabilities to perform complex Internet operations such as E-mail, FTP, SSL, embedded web server and others. Internet controller mode can be used with any hardware interface.
Nano WiReach includes RMII, USB, SPI and fast UART interfaces for easy integration into existing or new designs.
Nano WiReach offers a highly advanced level of Internet security. It includes the latest WiFi encryption algorithms (WPA/WPA2, in both PSK and Enterprise modes) and Internet SSL encryption algorithms. In addition, it serves as an inherent firewall, protecting the embedded application from attacks originating from the Internet.
Protocols accelerated in hardware: AES, 3DES and SHA
Application Program Interface:
Connect One’s AT+i protocol
SerialNET mode for transparent serial data-to-Internet bridging
LAN-WiFi transparent bridging
PPP operation mode for Modem-WiFi conversion
Warranty: One year
Radio and EMC:
FCC Modular Approval. FCC ID: XM5-SM2144N1
CFR Title 47 FCC Part 15, Subpart B and C
Industry Canada Module Approval. IC: 8516A-SM2144N1
Industry Canada ICES-003, RSS-Gen, RSS-210
EN 300 328 (R&TTE Directive 1999/5/EC)
EN 301 489 (EMC Directive 2004/108/EC)
CAN/CSA-C22.2 No. 60950
EN 60950, Low Voltage Directive (2006/95/EC)
The Nano WiReach must be installed within a full-enclosure device that is safety certified.
The II-EVB-363MW evaluation board provides an easy environment for testing the Nano WiReach prior to designing it into your product.
The EVB includes an RS-232 female DB-9 connector, RJ-45 LAN connector, USB Connector and SPI header to connect to a host device and a power supply. It also includes a coaxial cable and WiFi antenna. Also included are one Nano WiReach and one female 30 pin conncetor for prototyping.