Connect One’s DualCOre II-EVB-PIC-2128 evaluation board enables M2M profressionals to realize an almost immediate IP solution for many M2M applciations which utilize Microchip's PIC product line. It is based on Microchip’s PIC24FJ64GA006 host CPU and Connect One’s iChip CO2128 Ethernet LAN controller.
II-EVB-PIC-2128 provides the networking via the CO2128 which features include the ability to stream data over TCP or UDP sockets (up to 10 simultaneous active sockets are available) and manage two listening sockets. A secure socket (SSL3/TLS1) is fully supported. Additional features include the ability to send and receive emails with or without attachments, a built-in web server with two internal websites, one for remote control and management of the II-EVB-PIC-2128 and the other for the device; HTTP, FTP, and TELNET clients;
The detailed reference design is targeted to those looking to develop and manage an open and flexible internet enabled application.
Value proposition:
Dual core, Internet -secure architecture
Flexible development environment based on the establishedPIC architecture
Production-ready IP networking and networking applications
Flexible, low cost, PHY- independent design
A set of software drivers and high-level API functions are available for download here. These API functions enable the PIC host CPU to communicate with the iChip CO2128 Ethernet LAN controller
To develop applications based on the PIC Host Driver API functions, the following environment is required to be installed on your PC:
• MPLAB IDE 8.0 or higher • MPLAB C30 C compiler • MPLAB ICD 2 debugger/programmer
The Internet engine inside II-EVB-PIC-2128 is Connect One’s remotely updateable iChip™ CO2128 Secure Internet Controller™.
Buy Online
You may also find a local partner on our Where To Buy page.
Ordering information
Part Number
Description
IIEVB-PIC-2128-110
Dual Core PIC + CO2128 evaluation board - 110V
IIEVB-PIC-2128-220
Dual Core PIC + CO2128 evaluation board - 220V
Internet Protocols: · IP, ARP, ICMP, UDP, TCP, DHCP, DNS, MIME, NTP, SMTP, POP3, HTTP, FTP, and TELNET
Protocols Accelerated in HW: · AES, 3DES and SHA Hardware Description: · Size: 110 x 67 x 28 mm (4.3 x 2.6 x 1.1”) · Weight: 96 g (3.4 oz.) · Operating Humidity: 90% maximum (non-condensing) · Operating Temperature Range: 5° to 50°C (41° to 122°F) · Power Supply Input: 6-24VDC. 9V power supply adaptor included unless otherwise specified. Power from host device optionally available through pin 9 of serial connector. · Power Consumption: 0.8W @ 9VDC · LEDs: LNK – Link status ACT – LAN activity SNET – SerialNET mode activity PWR – Power · Connectors: RS232/RS485, RJ-45, 2.1 mm power jack · Plastic enclosure
Performance Specifications: · Host Data Rate: Up to 1Mbps · Serial Data Format (AT+i mode): Asynchronous character; binary; 8 data bits; no parity; 1 stop bit. · Serial Data Format (SerialNET mode): Asynchronous character; binary; 7 or 8 data bits; odd, even or no parity; 1 stop bit. · Flow Control: hardware (DTR, RTS, CTS, DSR) and software flow control.
