Secure iWiFi™ is a serial-to-WiFi device server that enables installed serial devices to connect via their existing serial port to the Internet over an 802.11b/g Wireless LAN.
Secure iWiFi acts as a security gap between the host application and the network. It provides one secure SSL3/TLS1 socket; supports up to 10 simultaneous active TCP/UDP sockets and two listening sockets; a web server with two websites; SMTP and POP3 clients; MIME attachments; FTP and TELNET clients, and SerialNET™ mode for serial-to-IP bridging.
Secure iWiFi eliminates the need for any hardware modifications to the host device. Simply connect a serial cable from Secure iWiFi’s RS232 or RS485 connector to your device. Secure iWiFi is ready to connect to the Wireless LAN via its integrated antenna.
The Internet engine inside Secure iWiFi is Connect One’s remotely updateable iChip™ CO2128 Secure Internet Controller™. Connect One’s AT+i™ protocol eliminates the need for Internet programming and minimizes changes to the host application. Connect One’s SerialNET™ operating mode completely eliminates the need for changes to the host application, as it is a true plug-and-play operating mode.
Secure iWiFi is powered by an external 9VDC power supply. Alternatively, it can be powered through pin 9 of the RS232/RS485 connector to the host device. It includes a Power Save mode for reduced power consumption.
Buy Online
You may also find a local partner on our Where To Buy page.
Hardware Description: · Size: 94 x 63 x 28 mm (3.7 x 2.5 x 1.1”) · Weight: 105 g (3.7 oz.) · 16Mbit flash memory · Operating Humidity: 90% maximum (non-condensing) · Operating Temperature Range: 5° to 50°C (41° to 122°F). · Power Supply Input: 6-24 VDC. 9V power supply adaptor included unless otherwise specified. Power from host device optionally available through pin 9 of serial connector. · Power Consumption: 1.2W @ 9VDC (typical) 180mW @ 9VDC (Power Save mode) · LEDs: LNK – Link status SNET – SerialNET mode activity PWR – Power · Connectors: RS232/RS485, 2.1 mm power jack · Includes WLAN 802.11b/g antenna · Plastic enclosure
Performance Specifications: · Host Data Rate: Up to 1Mbps · Serial Data Format (AT+i mode): Asynchronous character; binary; 8 data bits; no parity; 1 stop bit. · Serial Data Format (SerialNET mode): Asynchronous character; binary; 7 or 8 data bits; odd, even or no parity; 1 stop bit. · Flow Control: hardware (DTR, RTS, CTS, DSR) and software flow control.
