Connect One offers reference designs for customers who wish to implement a low-cost, on-PCB solution. Customers already using a Connect One LAN module do not need to make any modification to their application.
All reference designs require 16mbit flash memory, please make sure to use one of following models:
TSOP package:
AMIC - A29L160AUV-70UF
EON - EN29LV160BB-70TIP or EN29LV160AB-70TIP
ST Micro - M29W160EB-70N6F
Macronix - MX29LV160DBTI-70G
BGA package:
AMIC - A29L160AUG-70UF
EON - EN29LV160BB-70BIP OR EN29LV160AB-70BIP
ST Micro - M29W160EB-70ZA6F
Macronix - MX29LV160DBXBI-70G
CO2128/2144/2064 support all major MII/RMII PHY. Connect One offers reference designs for several vendors. Please contact Connect One support in order to ensure technical fit of other vendors by emailing support@connectone.com
iChipSec CO2128 
RD#148: Davicom 10/100BaseT and USI WiFi Using CO2128 - updated May 24, 2009
RD#149: Davicom 10/100BaseT and Wi2Wi WiFi Using CO2128 - updated May 24, 2009
RD#153: Micrel 10/100BaseT LAN and EBI Flash Memory Using CO2128
Uploaded on November 5, 2007
iChipSec CO2144
RD#162: Davicom 10/100BaseT Using CO2144
Uploaded on November 18, 2009
RD#163: SMSC 10/100BaseT Using CO2144
Uploaded on November 18, 2009
iChipSec CO2064SEC
RD#150: - Davicom 10/100BaseT using CO2064SEC with SPI Flash
Uploaded on November 3. 2007
RD#151: Davicom 10/100BaseT using CO2064
Uploaded on November 3. 2007
RD#152: Micrel 10/100BaseT using CO2064
Uploaded on November 3. 2007
|
